Back Panel Of The Ac1900 Wifi Cable Data Gateway - NETGEAR C6300BD User Manual

Back Panel of the AC1900 WiFi Cable Data Gateway

The back panel contains ports, connectors, and a recessed button.
l
Figure 2. Back panel connections and button of the AC1900
The back panel includes the following components, viewed from top to bottom:
• Recessed Reset button. To set the gateway to the original factory settings, press and
hold the Reset button for at least seven seconds. For more information, see
WiFi Cable Data Gateway to Its Factory Default Settings
• Four 10/100/1000 Mbps Ethernet LAN ports. Use these ports to connect local computers
to the Ethernet LAN of the cable data gateway.
• USB port. The USB 2.0 port lets you connect a USB hard drive or flash drive to the cable
data gateway.
• Coaxial cable connector. Attach a coaxial cable to the cable service provider's
connection.
• Power input connector. Attach the power adapter cable to this input.
AC1900, N900, and N450 WiFi Cable Data Gateways
Reset button
Ethernet LAN ports
USB port
Coaxial cable connector
Power adapter input
Hardware Overview
11
Return the
on page 94.