Dual Wan Settings - NETGEAR 6100D User Manual

Item
MSID
DRC Cover
DRC Value
Channel
Roaming
PRL Version
1xRTT PN
EVDO PN
PRev
Rx Power
Serving SID
NID
Packet Zone ID
Frame Error Rate
Subnet Color Code Technical support staff may request this value from you.
AN-AAA
Packet Error Rate
MIP Error Code

Dual WAN Settings

This page is used to configure the broadband dual WAN Settings.
The default setting is to always use mobile broadband.
To specify broadband settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The default
password is password.)
4. Click Settings > Network > Dual WAN Settings.
Gateway Settings
Mobile Station Identifier.
Digital Rate Control Cover.
Digital Rate Control Value.
DRC Channel number.
Indicates if you are roaming on Sprint, domestically, or internationally.
Preferred Roaming List version. To update the PRL, see Network Page.
Technical support staff may request this value from you.
Technical support staff may request this value from you.
Technical support staff may request this value from you.
Technical support staff may request this value from you.
The Serving System ID identifies your home network area and is used to
determine if you are 'home' or 'roaming'.
Technical support staff may request this value from you.
Technical support staff may request this value from you.
Used to determine the quality of a signal connection. Technical support staff
may request this value from you.
Technical support staff may request this value from you.
Technical support staff may request this value from you.
The Mobile IP Error Code. Technical support staff may request this value
from you.
Description
65