Ethernet Wan Settings; Connect The Ethernet Wan Port - NETGEAR LG6100D User Manual

The following information is displayed.
Item
Connect with us
Facebook
Twitter
Product Support
User Guide
FAQs
Survey
Customer
Feedback Survey

Ethernet WAN Settings

Your gateway has an Ethernet WAN port on the rear panel. You can use an Ethernet cable to
connect the gateway to Internet service.

Connect the Ethernet WAN Port

You can connect the gateway to a cable or DSL modem with an Ethernet cable and set up the
router to use that modem's Internet service instead of the mobile service.
To install the gateway with an Ethernet Internet connection:
1. Prepare your modem.
Unplug your modem's power.

 If the modem has a battery backup, remove its batteries.
 If your modem was already connected to another router, disconnect the cable
between your modem and that router.
 Make sure that your modem is turned off and is cabled only to the wall jack for your
Internet service.
Gateway Settings
Description
Click to view the AirCard Facebook page in a new browser window or
tab. (Your device must be connected to the network for this option to
work.)
Click to view the AirCard Twitter feed in a new browser window or tab.
(Your device must be connected to the network for this option to work.)
Open an online version of this user guide in a new window or tab.
Read frequently asked questions and answers.
Participate in a NETGEAR customer survey.
76