NETGEAR C6300BD User Manual page 110

AC1900, N900, and N450 WiFi Cable Data Gateways
6. Change the advanced WiFi settings for the 2.4 GHz and 5 GHz radios:
• Enable Wireless Router Radio. By default, the Enable Wireless Router Radio
check box is selected and the WiFi radio is enabled.
Clearing this check box turns off the WiFi radio of the cable data gateway. When the
WiFi radio is disabled, you can still use the cable data gateway by connecting devices
with an Ethernet cable.
• Fragmentation Length (256-2346), CTS/RTS Threshold (1-2347), and Preamble
Mode. These settings are reserved for WiFi testing and advanced configuration only.
Do not change these settings unless directed by Cox Support. Incorrect settings
might disable the WiFi function of the cable data gateway unexpectedly.
The following settings are the default settings:
- Fragmentation Length. 2346
- CTS/RTS Threshold. 2347
- Preamble Mode. Long Preamble
7. Click the Apply button.
Your settings are saved.
Configure Advanced Features
110