To access NETGEAR genie to set up your cable data gateway:
1.
Apply power to the cable data gateway.
2.
On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft Internet
Explorer.
3.
In the address field of your browser, type http://routerlogin.net (or http://192.168.0.1).
The login screen displays. You are prompted to enter a user name and password.
4.
Type admin for the user name and password for the password.
5.
Click the OK button.
The NETGEAR genie BASIC Home screen displays. The following figure shows the
screen for the AC1900 WiFi Cable Data Gateway, Model C6300BD.
AC1900, N900, and N450 WiFi Cable Data Gateways
admin
********
Connect and Get Started
24