G. Main Drive Assembly
1. Removing the Main Drive Assembly
1) Remove the developing assembly and the drum unit.
2) Remove the rear cover.
3) Remove the screw
lamp regulator PCB
4) Remove the faston
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
, and disconnect the three connectors
.
Figure 7-418
.
Figure 7-419
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 CONTROLS AND EXTERNALS
; then, remove the
7-19