Canon NP6330 Service Manual page 315

CHAPTER 8 PAPER DECK PEDESTAL
5) Remove the pick-up roller from the rear, and remove the pick-up roller shaft from the
bushing at the rear.
6) Remove the drive belt
and the roller shaft
Points to Note
When attaching the feeding roller
the feeding roller is toward the rear of the pedestal.
8-32
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
from the feeding roller
.
Figure 8-634
, make sure that the belt pulley
Figure 8-635
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, and remove the feeding roller
(front of pedestal)
attached to