CHAPTER 5 PICK-UP/FEEDING SYSTEM
D. Feeding Assembly
1. Removing the Feeding Assembly
1) Remove the drum unit and the developing assembly.
2) Remove the fixing assembly.
3) Pull out the pin
4) Remove the screw
5-62
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
, and remove the lower feeding assembly lever
Figure 5-734
, and disconnect the connector
Figure 5-735
.
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.