CHAPTER 11 TROUBLESHOOTING
9
Adjusting the Pressure of the Separation Pad (multifeeder assembly)
If double feeding or pick-up failure occurs during pick-up, adjust the position of the
pressure spring
of the separaiton pad.
If double feeding occurs, move the spring holder toward
If pick-up failure occurs, move the spring holder toward
10
Routing the Drive Belt
Route the drive belt through the gears and rollers as shown in Figure 11-246.
11-38
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Figure 11-245
Drum drive belt
Drive belt
Figure 11-246
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
.
Main motor
Pulley A
Pulley B