CHAPTER 11 TROUBLESHOOTING
B. Exposure System
1
Routing the Scanner Drive Cable
Route the cable in the order indicated; then, adjust the tension of the cable and the
position of the mirror.
Note:
Before starting the work, be sure to fix the No. 2 mirror mount temporarily in place
to the front and rear side plates.
=0 –
3mm
11-22
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Figure 11-214
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Put the steel ball
into the hole
of the pully.
Wind
eight times.
Fix in place
temporarily.