Canon NP6330 Service Manual page 317

CHAPTER 8 PAPER DECK PEDESTAL
6. Adjusting the Pressure of the Separation Roller
If double feeding or pick-up failure occurs frequently during pick-up operation, adjust
the position of the pressure spring for the separation roller.
if double feeding is frequent, move the hook of the spring toward
if pick-up failure is frequent, move the hook of the spring toward
7. Position of the Pick-Up Roller Release Solenoid (SL1)
Attach the solenoid so that the pick-up roller arm
when the plunger of the solenoid is pushed in.
8-34
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Feeding roller
Separation roller
Figure 8-639
Butted
Figure 8-640
Pressure lever
Pressure spring
butts against the upper stay
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
.