Adjusting The Tension Of The Scanner Cable - Canon NP6330 Service Manual

3

Adjusting the Tension of the Scanner Cable

Loosen the binding screw, and align the tensioner plate to the line marked with a
scribe in advance.
Or, tighten the binding screw so that the wire spring and the hole in the side plate
shown in Figure 11-219 is 0 to 3 mm when viewed from the front.
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Line drawn with a scribe
Binding screw
Tensioner plate
Figure 11-219
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
r=0 – 3mm
Wire spring
11-25