Log Placement Instructions - Heat & Glo 350TRSI-AUF Owner's Manual

E. Log Placement Instructions
2
3
Carefully remove the logs from the packaging. CAUTION: Logs are fragile!
LOG #1 (SRV327-701): Place log #1 at the rear of the unit, with the left edge behind the tab on the pilot bracket. The right
side sits behind the tab on the support bracket.
2
LOG #2 (SRV2033-701):
the burner by placing the log slot over the burner tab as shown.
1
4
5
6
1
Locate the bottom groove of log #2 over the left most grate tine and align over
Heat & Glo • 350TRSI-AUF, 350TRSILP-AUF • 2089-980 Rev. o • 6/12
Log Assembly: LOGS-350CE-D
PILOT
BRACKET TAB
BURNER TABS
1
2
SUPPORT
BRACKET
65