Log Placement Instructions - Heat & Glo 550TRSI-AUF Owner's Manual

E. Log Placement Instructions Log Assembly: LOGS-550TRSAUD
1 2 3 4 5 6 7 8
CAUTION: Logs are fragile! Carefully remove the logs from the packaging.
1
1
LOG #1 (SRV550-715): Place log #1 onto the log grate so that the notches in the bottom of the log fit on the right three grate
tines. Push log #1 towards the rear locating tabs.
2
2
LOG #2 (SRV347-703): Place log #2 so that its left edge sits against the left front grate corner and its right edge rests against
the tab on the second grate tine.
Heat & Glo • 550TRSI-AUF, 550TRSILP-AUF • 2079-980 Rev. N • 5/12 65