Communication Test - Canon imageRUNNER ADVANCE-series Service Manual

3
Operations > System Management Operations > Communication Test

Communication Test

This section describes how to check if the communication is normally done to the distribution
server and/or the file server.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
3. Press [Software Management Settings] button.
3 Operations > System Management Operations > Communication Test
4. Press [Test Communication] button.
5. Press [Yes] button.
F-3-46 F-3-46
Obtain the download file information for communication test from the distribution server (to
execute the communication test to the distribution server).
Using the download file information for communication test, the contents for test are
downloaded from the file server (for the communication test to the file server).
3-19
F-3-47 F-3-47
F-3-48 F-3-48
3-19