Canon imageRUNNER ADVANCE-series Service Manual page 26

3
Operations > Firmware Operations > Downloading and Updating Firmware > c. Manual Download and Update (On-site Update from Service Mode)
4. Confirm the firmware to be updated in either of the following 2 ways.
•
To update to the official edition, press [Confirm Applicable Firmware] button and go to Step 6.
•
To update to the individual response edition, press [Special Firmware] and go to Step 5.
5. [Special Firmware] screen is shown as below. Enter the fields and press [OK] button.
•
[Retrieval ID]:
Enter numeric up to 8 characters.
•
[Password]:
Enter numeric up to 8 characters.
3 Operations > Firmware Operations > Downloading and Updating Firmware > c. Manual Download and Update (On-site Update from Service Mode)
6. [New Firmware] screen is shown as below. Check the contents and press [Next] button.
•
[Version]:
The current firmware version is shown.
•
[Applicable Firmware]:
F-3-11 F-3-11
Select the firmware applicable to the device from the dropdown list.
•
[Additional Languages]:
If there are any additional languages, they are displayed.
Multiple selection is available, and it is necessary to select a language registered on the
device.
•
[Release Note]:
If any release note is published, the contents are shown here.
NOTE:
To update to the individual response edition, the firmware corresponding to the ID and
password that you input is displayed.in [Applicable Firmware]..
F-3-12 F-3-12
3-6
F-3-13 F-3-13
3-6