Manual Download And Update (On-Site Update From Service Mode) - Canon imageRUNNER ADVANCE-series Service Manual

3
Operations > Firmware Operations > Downloading and Updating Firmware > c. Manual Download and Update (On-site Update from Service Mode)
c. Manual Download and Update (On-site Update from Service
Mode)
The figure below shows the operational flow of "Manual Download and Update".
STEP 1
Download using
Updater
STEP 1: Download using Updater
The firmware can be downloaded from CDS to the device using Updater.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User mode)] on the control panel.
4). [Service Mode] screen is shown.
3 Operations > Firmware Operations > Downloading and Updating Firmware > c. Manual Download and Update (On-site Update from Service Mode)
STEP 2
Update using
Updater
F-3-8 F-3-8
2. Press [Updater] button.
3. Press [Update Firmware] button.
3-5
F-3-9 F-3-9
F-3-10 F-3-10
3-5