2
Preparation > Network Settings > Communication Test
Communication Test
This section describes how to check if the communication is normally done to the distribution
server and/or the file server.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
2
Preparation > Network Settings > Communication Test
3. Press [Software Management Settings] button.
4. Press [Test Communication] button.
F-2-5
F-2-5
2-5
F-2-6
F-2-6
F-2-7
F-2-7
2-5