Led Descriptions - ZyXEL Communications eircom D1000 User Manual

27.1 LED Descriptions

Table 89 LED Descriptions
LED
USB
POWER
ETHERNET 1-4
WiFi
DSL
INTERNET
eircom D1000 modem User's Guide
COLOR STATUS DESCRIPTION
Green On The Device recognizes a USB connection through the USB slot.
Blinking The Device is sending/receiving data to /from the USB device
connected to it.
Green On The Device is receiving power and ready for use.
Blinking The Device is self-testing.
Red On The Device detected an error while self-testing, or there is a
device malfunction.
Off The Device is not receiving power.
Green On The Device has an Ethernet connection with a device on the Local
Area Network (LAN).
Blinking The Device is sending/receiving data to /from the LAN.
Off The Device does not have an Ethernet connection with the LAN.
Green On The wireless network is activated.
Blinking The Device is communicating with other wireless clients.
Orange Blinking The Device is setting up a WPS connection.
Off The wireless network is not activated.
Green On The DSL line is up.
Blinking The Device is initializing the DSL line.
Off The DSL line is down.
Green On The Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used) and the DSL connection is up.
Blinking The Device is sending or receiving IP traffic.
Red On The Device attempted to make an IP connection but failed.
Possible causes are no response from a DHCP server, no PPPoE
response, PPPoE authentication failed.
Off The Device does not have an IP connection.
LED Descriptions
2 7
213