Figure 81 Menu 3.5.4 - Bridge Link Configuration; Table 51 Menu 3.5.4 Bridge Link Configuration - ZyXEL Communications ZyAIR G-5100 User Manual

4 Move the cursor to the Edit Bridge Link Configuration field. Press [SPACE BAR] to
select Yes and press [ENTER]. Menu 3.5.4 – Bridge Link Configuration displays as
shown next.

Figure 81 Menu 3.5.4 - Bridge Link Configuration

The following table describes the fields in this menu.

Table 51 Menu 3.5.4 Bridge Link Configuration

FIELD
Enable Link 1-6
Peer MAC Address
Enable WDS Security A Wireless Distribution System (WDS) is a wireless connection between two or
PSK
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Chapter 14 LAN Setup
Menu 3.5.4 - Bridge Link Configuration
Enable Link 1= No
PSK= N/A
Enable Link 2= No
PSK= N/A
Enable Link 3= No
PSK= N/A
Enable Link 4= No
PSK= N/A
Enable Link 5= No
PSK= N/A
Enable WDS Security= No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] to select Yes or No and press [ENTER].
Type the MAC address of a wireless bridge in valid MAC address format, that
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
more APs.
Press [SPACE BAR] to select Yes to use TKIP to encrypt traffic on the WDS
between APs.
When you enable WDS security, type a Pre-Shared Key (PSK) for each link.
Note: Other wireless bridges must use the same encryption
method to enable WDS security.
When you enable WDS, type a Pre-Shared Key (PSK) for each link. The pre-
shared key can be from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
ZyAIR G-5100 User's Guide
Peer MAC Address= 00:00:00:00:00:00
Peer MAC Address= 00:00:00:00:00:00
Peer MAC Address= 00:00:00:00:00:00
Peer MAC Address= 00:00:00:00:00:00
Peer MAC Address= 00:00:00:00:00:00
147