Table 64
COMMAND
Local File
Remote File
Binary
Abort
20.2.5 Backup Via Console Port
Back up configuration via console port by following the HyperTerminal procedure shown
next. Procedures using other serial communications programs should be similar.
1 Display menu 24.5 and enter "y" at the following screen.
Figure 102 System Maintenance: Backup Configuration
2 The following screen indicates that the Xmodem download has started.
Figure 103 System Maintenance: Starting Xmodem Download Screen
3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Figure 104 Backup Configuration Example
4 After a successful backup you will see the following screen. Press any key to return to the
SMT menu.
Chapter 20 Firmware and Configuration File Maintenance
General Commands for Third Party TFTP Clients (continued)
DESCRIPTION
Enter the path and name of the firmware file (*.bin extension) or configuration
file (*.rom extension) on your computer.
This is the filename on the ZyAIR. The filename for the firmware is "ras" and for
the configuration file, is "rom-0".
Transfer the file in binary mode.
Stop transfer of the file.
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
ZyAIR G-5100 User's Guide
Type a location
for storing the
configuration file
or click Browse
to look for one.
Choose the
Xmodem protocol.
Then click Receive.
173