Figure 89 Menu 23.2 System Security: Radius Server; Table 57 Menu 23.2 System Security: Radius Server - ZyXEL Communications ZyAIR G-5100 User Manual

Outdoor dual-802.11g wireless lan access point & bridge
Hide thumbs Also See for ZyAIR G-5100:
Table of Contents

Advertisement

ZyAIR G-5100 User's Guide
From Menu 23- System Security, enter 2 to display Menu 23.2 – System Security –
RADIUS Server as shown next.

Figure 89 Menu 23.2 System Security: RADIUS Server

The following table describes the fields in this menu.

Table 57 Menu 23.2 System Security: RADIUS Server

FIELD
Authentication Server
Active
Server Address
Port
Shared Secret
Accounting Server
Active
Server Address
Port
158
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= No
Server Address= 0.0.0.0
Port #= 1812
Shared Secret= ********
Accounting Server:
Active= No
Server Address= 0.0.0.0
Port #= 1813
Shared Secret= ********
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] to select Yes and press [ENTER] to enable user
authentication through an external authentication server.
To use an external authentication server, enter its IP address in dotted
decimal notation.
Enter 127.0.0.1 to use the internal authentication server.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.
To use an external authentication server, specify a password (up to 31
alphanumeric characters) as the key to be shared between the external
authentication server and the access points.
The key is not sent over the network. This key must be the same on the
external authentication server and ZyAIR.
Enter 1234 to use the internal authentication server.
Press [SPACE BAR] to select Yes and press [ENTER] to enable user
authentication through an external accounting server.
Enter the IP address of the external accounting server in dotted decimal
notation.
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Chapter 18 System Security

Advertisement

Table of Contents
loading

Table of Contents