System Management Terminal Interface Summary; Figure 70 Smt Main Menu; Table 44 Main Menu Summary - ZyXEL Communications ZyAIR G-5100 User Manual

ZyAIR G-5100 User's Guide
Table 43 Main Menu Commands (continued)
OPERATION
Required fields
N/A fields
Save your
configuration
Exit the SMT
After you enter the password, the SMT displays the main menu, as shown next.
Figure 70

12.4.1 System Management Terminal Interface Summary

Table 44 Main Menu Summary

# MENU TITLE
1 General Setup
3 LAN Setup
14 Dial-in User Setup
16 VLAN Setup
22 SNMP Configuration
134
KEYSTROKE
?
< > or ChangeMe
<N/A>
[ENTER]
Type 99, then press
[ENTER].
SMT Main Menu
Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
ZyAIR G-5100 Main Menu
Getting Started
1. General Setup
3. LAN Setup
Advanced Applications
14. Dial-in User Setup
16. VLAN Setup
Enter Menu Selection Number:
DESCRIPTION
Use this menu to set up your general information.
Use this menu to set up your LAN and WLAN connection.
Use this menu to set up local user profiles on the ZyAIR.
Use this menu to set up your VLAN ID.
Use this menu to set up SNMP related parameters.
DESCRIPTION
All fields with the symbol <?> must be filled in order to be
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.
Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
Save your configuration by pressing [ENTER] at the
message "Press ENTER to confirm or ESC to cancel".
Saving the data on the screen will take you, in most cases
to the previous menu.
Make sure you save your settings in each screen that you
configure.
Type 99 at the main menu prompt and press [ENTER] to
exit the SMT interface.
Advanced Management
22. SNMP Configuration
23. System Security
24. System Maintenance
99. Exit
Chapter 12 Introducing the SMT