Figure 17-3 Menu 23.2 System Security : Radius Server; Table 17-1 Menu 23.2 System Security : Radius Server - ZyXEL Communications ZyAir Access Point Series User Manual

ZyAIR Access Point Series User's Guide

Figure 17-3 Menu 23.2 System Security : RADIUS Server

The following table describes the fields in this menu.
FIELD
Authentication Server
Active
Server Address
Port
Shared Secret
Accounting Server
Active
Server Address
17-2
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= No
Server Address= 10.11.12.13
Port #= 1812
Shared Secret= ?
Accounting Server:
Active= No
Server Address= 10.11.12.13
Port #= 1813
Shared Secret= ?
Press ENTER to Confirm or ESC to Cancel:

Table 17-1 Menu 23.2 System Security : RADIUS Server

Press [SPACE BAR] to select Yes and press [ENTER] to enable
user authentication through an external authentication server.
Enter the IP address of the external authentication server in
dotted decimal notation.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator
instructs you to do so with additional information.
Specify a password (up to 31 alphanumeric characters) as the key
to be shared between the external authentication server and the
access points.
The key is not sent over the network. This key must be the same
on the external authentication server and ZyAIR.
Press [SPACE BAR] to select Yes and press [ENTER] to enable
user authentication through an external accounting server.
Enter the IP address of the external accounting server in dotted
decimal notation.
DESCRIPTION EXAMPLE
No
10.11.12.13
1812
No
10.11.12.13
System Security