Travel Mode Switch; Travel Alarm (Optional) - Hitachi ZAXIS 450LC-3 Operator's Manual

TRAVEL MODE SWITCH

d
WARNING: Tipping-over accidents can cause serious
personal injury. Do not change travel mode while
traveling; especially, changing to the fast mode
when descending slopes will create a very dangerous
situation. Always stop the machine before changing
the travel speed mode.
Turn travel mode switch (1) on the switch panel to the
specified position to select the travel mode (Fast/Slow).
• Fast Mode: Turn travel mode switch (1) to
position.
• Slow Mode: Turn travel mode switch (1) to
position.
Mark (Fast Speed Mode)
Mark (Slow Speed Mode)

TRAVEL ALARM (Optional)

During travel operation, travel alarm (4) sounds the buzzer
to warn the people near the machine that the machine is
traveling.
Deactivating Travel Alarm
More than 12 seconds after starting to travel the machine,
raise the armrest and push travel alarm deactivation switch
(5) to stop the travel alarm. (Within 12 seconds, the travel
alarm deactivation switch is inoperable.)
Once the machine stops traveling and when restarting to
travel, the travel alarm will sound again. If desired to stop
the alarm, operate deactivation switch (5) once more.
f
NOTE: The optional switch locations differ depending on
what kinds of optional devices are equipped. Before
using the switches, make sure what kinds of optional
devices are equipped.
DRIVING THE MACHINE
mark (2)
mark (3)
4-4
2
3
4
Armrest
5
1
M1U1-01-015
M162-01-016
M1J1-03-001
5
M1U1-01-035