CHECK INSTRUMENTS AFTER STARTING
Checking the instruments through the Monitor Functions.
After starting the engine, check the following points through
the monitor functions.
Check that
1. Alternator alarm (1) is off.
2. Engine oil pressure alarm (2) is off.
3. Engine noise and exhaust gas are normal.
IMPORTANT: Prevent possible damage to engine. If
alarm lights do not go out after starting
engine, IMMEDIATELY STOP THE ENGINE
and correct the cause.
Operate machine at less-than-normal
loads and speeds until engine is at normal
operating temperature.
OPERATING THE ENGINE
3-8
1
2
M1J1-03-006