Extending Password Duration Time
IMPORTANT: This operation is applicable only to those
machines that display the basic screen
based upon password input.
By using the password duration screen, password duration
time can be set. When you restarting the machine, a password
need not be input within that timeframe.
1. When turn the key switch to the OFF position, the
monitor unit displays the password duration screen for
ten seconds.
2. While the password duration screen is still displayed,
push a relevant key, and password duration time is set.
Duration time assigned to each key is as follows:
key 1: 0 minute
key 2: 30 minutes
key 3: 60 minutes
key 4: 90 minutes
key 5: 120 minutes
f
NOTE: If password duration time is not set explicitly, 0
minute on duration time is assumed.
3. If turning the key switch to the ON position within
password duration time, the monitor unit displays the
basic screen after the starting screen.
OPERATOR'S STATION
1-17
Key 1
Key2
Key3
Password Duration Screen (Key Switch: OFF)
Key Switch: ON
Basic Screen
Key5
Key4
T1V1-05-01-012
T1V1-05-01-115
M1J1-01-002