Drain Fuel Tank Sump - Hitachi ZAXIS 450LC-3 Operator's Manual

Hydraulic
Hide thumbs Also See for ZAXIS 450LC-3:
Table of Contents

Advertisement

8. To avoid condensation, fill the tank at the end of each
day's operation. Take care not to spill fuel on the
machine or ground.
Model
ZX450LC
ZX650LC
ZX850LC
Do not fill the tank more than specified. Stop filling when
fuel becomes visible in fuel level gauge (3).
9. Reinstall filler cap (2) on the filler tube. Be sure to lock
filler cap (2) with the key to prevent the cap from being
lost as well as to prevent vandalism.
IMPORTANT: Take precautions for Fueling with
Automatic Fueling Device (Optional).
Avoid overfilling. Never fail to remove filler
cap (2) when refueling with the automatic
fueling device and be sure to stop fueling
when fuel becomes visible in fuel level
gauge (3).
1
Drain Fuel Tank Sump --- daily
1. Park the machine on a level surface with the
upperstructure rotated 90° for easier access.
2. Lower the bucket to the ground.
3. Turn the auto-idle switch off.
IMPORTANT: The turbocharger may be damaged if the
engine is not properly shut down.
4. Run the engine at slow idle speed without load for five
minutes.
5. Turn the key switch OFF. Remove the key from the key
switch.
6. Pull the pilot control shut-off lever to the LOCK position.
7. Open drain cock (1) for several seconds to drain water
and sediment. Close drain cock (1).
Tank Capacity
725 L (192 US gal)
-3
900 L (238 US gal)
-3
1120 L (296 US gal)
-3
MAINTENANCE
3
7-66
2
3
ZX450LC
-3
2
ZX650LC
-3
ZX850LC
-3
ZX450LC
-3
ZX650LC
, 850LC
-3
M1J1-07-016
M1J7-07-020
2
3
M1JB-07-031
1
M1J1-07-084
1
M1J7-07-051
-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zaxis 650lc-3Zaxis 850lc-3

Table of Contents