Avoid Power Lines; Precautions For Lightening; Object Handling - Hitachi ZAXIS 450LC-3 Operator's Manual

AVOID POWER LINES

• Serious injury or death can result if the machine or front
attachments are not kept a safe distance from electric lines.
• When operating near an electric line, NEVER move any
part of the machine or load closer than 3 m plus twice the
line insulator length.
• Check and comply with any local regulations that may
apply.
• Wet ground will expand the area that could cause any
person on it to be affected by electric shock. Keep all
bystanders or co-workers away from the site.

PRECAUTIONS FOR LIGHTENING

• The machine is vulnerable to lighting strikes.
• In the event of an electrical storm, immediately stop
operation, and lower the bucket to the ground. Evacuate
to a safe place far away from the machine.
• After the electrical storm has passed, check all of the
machine safety devices for any failure. If any failed
safety devices are found, operate the machine only after
repairing them.

OBJECT HANDLING

• If a lifted load should fall, any person nearby may be
struck by the falling load or may be crushed underneath it,
resulting in serious injury or death.
• When using the machine for craning operations, be sure
to comply with all local regulations.
• Do not use damaged chains or frayed cables, sables,
slings, or ropes.
• Before craning, position the upperstructure with the travel
motors at the rear.
• Move the load slowly and carefully. Never move it
suddenly.
• Keep all persons well away from the load.
• Never move a load over a person's head.
• Do not allow anyone to approach the load until it is safely
and securely situated on supporting blocks or on the
ground.
• Never attach a sling or chain to the bucket teeth. They
may come off, causing the load to fall.
SAFETY
029-E01A-0381
032-E01A-0132
S-18
SA-381
SA-1088
SA-014