Toshiba RAS-M10PKVP-E Service Manual page 77

10-2. Optional Parts, Accessories and Tools
10-2-1. Optional Installation Parts
Part Code
RAS-M10PKVP-E, RAS-M10PKVP-ND
[Y]
RAS-M13PKVP-E, RAS-M13PKVP-ND
RAS-M16PKVP-E, RAS-M16PKVP-ND
RAS-M18PKVP-E, RAS-M18PKVP-ND
[Z]
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and
nuts if the unit is likely to be exposed to a strong wind.
• Use dia. 8 mm or dia. 10 mm anchor bolts and nuts.
• If it is necessary to drain the defrost water, attach drain nipple
to the base plate of the outdoor unit before installing it.
10-2-2. Accessory and Installation Parts
Part No. Part name (Q'ty)
[1]
Installation plate × 1
[2]
Wireless remote controller × 1
[3]
Battery × 2
This model is not equipped with an extension drain hose.
• For the extension drain hose, use a commercially available one.
Indoor unit name
Shield pipe (for extension drain hose) (polyethylene foam, 8 mm thick)
Part No.
[4]
[5]
[6]
Parts name
Refrigerant piping
Liquid side
(Outer diameter)
6.35 mm
6.35 mm
Elongated drain hole
[8]
Part name (Q'ty)
Remote controller holder × 1
Mounting screw
Ø4 × 25L × 7
Remote controller holder
mounting screw
Ø3.1 × 16L × 2
– 77 –
Gas side
(Outer diameter)
9.52 mm
12.7 mm
600
Suction side
108 125
30
Drain hole
Diffuser
[7]
Part No. Part name (Q'ty)
[7]
Drain nipple ∗ × 1
[8]
Water-proof rubber cap ∗ × 2
Parts marked with asterisk (∗) are
packaged with the outdoor unit.
<Others>
Name
Owner's manual (Indoor unit)
Installation manual
Important information
and warning*
B/W strips
(Energy efficiency labels)
Q'ty
1 ea.
1
54