Oce cm3521 User Manual page 43

2
3
Select the desired destinations, and then touch [OK].
4
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to "Specifying the scan set-
tings" on page 2-43.
5
After specifying the settings, touch [OK].
6
Load the document into the ADF (optional) or position it on the original
glass of the machine.
7
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
2-10
Scanning documents
cm3521