Oce cm3521 User Manual page 190

Specifying settings from the control panel
Setting Up LDAP screen 5/6
Item
Select Server Authentication
Method
Use referral
Setting Up LDAP screen 6/6
Item
Login Name
Password
Domain Name
Check Connection
Reset All Settings
cm3521
Description
Select the method to be used during server authentication.
[Use The Setting Value]: Authenticates the settings speci-
fied in Setting Up LDAP screen 6/6.
[User Authentication]: Requires a user name and password
when using the LDAP search function. When logging on to
the copier with the external server authentication function,
the user name that was used when performing the external
server authentication is automatically entered in the LDAP
server login screen. The user name can also be changed.
[Dynamic Authentication]: Requires a user name and pass-
word when using the LDAP search function.
Select whether to use the referral setting. When referral is
used, the search base that was specified in LDAP Sever
Setting searches the top and bottom levels as the starting
point.
Description
Sets the login name used to connect to the LDAP server.
Use the keyboard that appears in the touch panel to type in
the name (up to 255 characters).
Sets the password used to connect to the LDAP server.
Use the keyboard that appears in the touch panel to type in
the password (up to 128 characters).
Sets the domain name used to connect to the LDAP server
as necessary. Use the keyboard that appears in the touch
panel to type in the name (up to 64 characters).
Checks the connection to the LDAP server.
The LDAP server settings can be reset to their factory
default.
When a reset confirmation message appears, touch [Yes].
3
3-79