Ping Tx Address - Oce cm3521 User Manual
Hide thumbs
Also See for cm3521:
- User manual (632 pages) ,
- Safety information & getting started (27 pages) ,
- User manual (382 pages)
Table of Contents
Advertisement
Specifying settings from the control panel
PING TX address
The host address of the device to ping can be specified.
1
In the PING Confirmation screen, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
–
To specify the host address with the IP address, touch [IP Address
Input].
–
To specify the host address with the host name, touch [Host Name
Input].
–
If selecting [Host Name Input], check that the DNS settings are
specified correctly before making the selection. For details, refer to
"TCP/IP settings" on page 3-47.
3
Enter the host address (IP address or host name (up to 255 charac-
ters)).
–
To edit the values that you entered with "IP Address Input", touch
[←] or [→] to move the cursor to the desired area, touch [Delete],
and enter the new value.
–
To clear all values, press the [C] (clear) key.
–
If the host address exceeds 81 characters, touch [Details] to display
the Host Address Detail screen with the rest of the host addresses.
4
Touch [OK].
The PING TX address is set.
cm3521
3
3-113
Advertisement
Table of Contents
