Lpd Settings; To Specify Lpd Settings - Oce cm3521 User Manual

3
3.28

LPD settings

The use of LPD when printing can be enabled or disabled.

To specify LPD settings

1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [7 LPD Setting].
The LPD Setting screen appears.
4
Touch [Enable] or [Disable].
5
Touch [OK].
The use of LPD is enabled or disabled.
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
3-116
Specifying settings from the control panel
cm3521