ZyXEL Communications ZyAIR User Manual page 239

FIELD
Outgoing:
My Login
My Password
Authen
PPTP:
My IP Address
My IP Mask
Server IP Address
Connection
ID/Name
Route
Edit IP
Telco Option:
Allocated
Budget (min)
Remote Node Configuration
Table 21-1 Menu 11.1 Remote Node Profile
Type the login name assigned by your ISP when the ZyAIR calls
this remote node.
Type the password assigned by your ISP when the ZyAIR calls this
remote node.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP – Your ZyAIR will accept either CHAP or PAP when
requested by this remote node.
CHAP – accept CHAP (Challenge Handshake Authentication
Protocol) only.
PAP – accept PAP (Password Authentication Protocol) only.
Type the (static) IP address assigned to you by your ISP in dotted
decimal notation.
Type the subnet mask of the PPTP server.
Type the IP address of the PPTP server in dotted decimal notation.
Enter the connection ID or connection name in this field. It must
follow the "c:id" and "n:name" format. For example, C:12 or N:My
ISP.
This field is optional and depends on the requirements of your DSL
modem.
This field determines the protocol used in routing. Options are IP
and None.
Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.3 – Remote Node Network Layer Options.
Telco Option is available only for PPTP or PPPoE encapsulation.
This sets a ceiling for outgoing call time for this remote node. The
default for this field is 0 meaning no budget control.
ZyAIR Wireless Gateway Series User's Guide
DESCRIPTION EXAMPLE
PAP
10.11.12.13
IP
(default)
No
0
(default)
21-3