Authentication; Figure 7-2 Wep Authentication Steps - ZyXEL Communications ZyAIR User Manual

ZyAIR Wireless Gateway Series User's Guide

7.2.2 Authentication

Three different methods can be used to authenticate wireless stations to the network: Open System, Shared
Key, and Auto. The following figure illustrates the steps involved.
Wireless Station
Open System Authentication
Open System Request
Shared Key Authentication
Shared Key Request
Encrypted Challenge Text
Open system authentication involves an unencrypted two-message procedure. A wireless station sends an
open system authentication request to the AP, which will then automatically accept and connect the wireless
station to the network. In effect, open system is not authentication at all as any station can gain access to the
network.
Shared key authentication involves a four-message procedure. A wireless station sends a shared key
authentication request to the AP, which will then reply with a challenge text message. The wireless station
must then use the AP's default WEP key to encrypt the challenge text and return it to the AP, which attempts
to decrypt the message using the AP's default WEP key. If the decrypted message matches the challenge text,
the wireless station is authenticated.
7-2
Authentication

Figure 7-2 WEP Authentication Steps

Access Point
Authentication Acceptance
Challenge Text
Authentication Acceptance
Wireless Security