Installation - Suzuki RM-Z250 Owner's Manual

INSTALLATION

Install the engine in the reverse order of removal. Pay attention to the following points:
• Fit the swingarm in its position and hold it with the swingarm pivot shaft.
• Mount the engine on the frame.
• Tighten the engine mounting bolts, nuts and swingarm pivot shaft nut to the specified torque.
NOTE:
* The engine mounting nut is the self-lock type and cannot be used repeatedly. If the self-lock effect is lose,
replace it with a new one.
* The engine mounting bolts and nuts can loosen quickly when the engine is removed and installed. Be sure
to retighten the bolts and nuts.
LH

ITEM N·m kgf-m
A
45 4.5
BC
66 6.6
D
70 7.0
EF
40 4.0
RH
a
lbf-ft
32.5
47.5
50.5
29.0
DISASSEMBLY AND ASSEMBLY 4-7
Shim