Suzuki RM-Z250 Owner's Manual page 154

4-74 DISASSEMBLY AND ASSEMBLY
• Place a drain pan under the front fork and drain fork oil.
NOTE:
Face the oil hole A on the sub-tank downward.
• Raise the outer tube and temporarily install the fork cap bolt
1 (sub-tank) to the outer tube.
• Clamp the axle holder 3 with a vise. Protect the axle holder
3 with a rag when using a vise.
• Loosen the center bolt 4 completely with a 21 mm socket
wrench.
Clamping the axle holder 3 too tight can damage it
which will affect riding stability.
Do not clamp the axle holder 3 too tight.
• Compress the outer tube by hands and install the piston
holder (special tool) between the axle holder bottom 3 and
lock-nut 5.
 09910-20115: Piston holder
 WARNING