Suzuki RM-Z250 Owner's Manual page 126

4-46 DISASSEMBLY AND ASSEMBLY
• Remove the throttle cable cover 9 by removing their bolts 8.
• Loosen the lock-nuts 0.
• Disconnect the throttle cables from their pulley.
• Remove the throttle body assembly.
Snapping down the throttle valve with the throttle
cable released can damage the throttle valve and
throttle body.
Do not snap down the throttle valve.
NOTE:
Do not apply pressured water to the throttle body cover drain as
muddy water can get into cover. If muddy water get into cover,
clean it.
NOTICE