Suzuki RM-Z250 Owner's Manual page 156

4-76 DISASSEMBLY AND ASSEMBLY
• Loosen the fork cap bolt 1 (sub-tank) and remove the
sub-tank 7 along with the damper rod assembly 8.
• Remove the fork spring 9.
NOTE:
Do not attempt to disassemble the damper rod assembly 8.
The damper rod assembly 8 is available only as an assembly.
• Remove the dust seal 0.
• Remove the stopper ring A.
Scratches on the inner tube could cause oil leaks.
Avoid scratching when removing.
NOTICE