Usb Buffer - Lexmark W812 User Reference Manual

PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the USB port requires it, regardless of the default printer language.
Values:
On* Printer examines data on the USB interface and selects PostScript emulation if the data
indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the
job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup
Menu if PCL SmartSwitch is Off.
See also:
PCL SmartSwitch;

USB Buffer

Purpose:
To configure the size of the USB input buffer.
Values:
Disabled
Auto*
3K to maximum
size allowed
Note: Changing the USB Buffer menu item automatically resets the printer.
See also:
Resource Save
Printer Language
Disables serial (Parallel, USB) port. Any jobs already buffered on the disk are
printed before normal processing of incoming jobs resumes.
Printer automatically calculates the USB Buffer size (recommended setting).
User specifies the USB Buffer size. The maximum size depends on the amount
of memory in your printer, the size of the other link buffers, and whether
Resource Save is set to On or Off. To maximize the range for the USB Buffer
size, disable or reduce the size of the parallel, serial, and network buffers.
177