Disabling The Usb Buffer - Lexmark Color Laser Installation And Administration Manual

7
A message will be displayed asking you to confirm the action: Contents will be lost. Continue?
• Select Yes to proceed with disk wiping and encryption. A status bar will indicate the progress of the encryption
task.
After the disk has been encrypted, the MFP will return to the Enable/Disable screen.
Warning: Do not power off the device during the encryption process. Doing so may result in loss of data.
Note: Disk encryption can take several hours to complete.
8
To finish, press Back, and then Exit Config Menu.
The MFP will power-on reset, and then return to normal operating mode.

Disabling the USB Buffer

Disabling the USB buffer disables the USB host port on the back of the device.
1
From the home screen, touch Menus > Network/Ports > Standard USB.
2
Scroll to the left to set the USB Buffer to Disabled.
3
Touch Submit.
8