Job Buffering; Npa Mode - Lexmark W812 User Reference Manual

Honor DSR
Purpose:
To determine whether the printer uses the Data Set Ready (DSR) signal. DSR is one of the
handshaking signals for most serial interface cables.
Values:
Off* All data received by the serial port is treated as valid data.
On Only data received while the DSR signal is high is treated as valid.
The serial interface uses DSR to distinguish data sent by the computer from data created by electrical
noise in the serial cable. This electrical noise can cause stray characters to print. Select On to prevent
stray characters from printing.

Job Buffering

Purpose:
To temporarily store jobs on the printer hard disk before printing.
Values:
Off* Does not buffer print jobs to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is busy processing data from another input port.
Note: Changing the Job Buffering menu item automatically resets the printer.

NPA Mode

Purpose:
To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Values:
On Printer performs NPA processing. If data is not in NPA format, it is rejected as bad data.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it appropriately.
Note: Changing this menu item automatically resets the printer.
155