Chapter 5: Holding A Job In The Printer; Printing And Deleting Held Jobs - Lexmark W812 User Reference Manual

5
Holding a job in the printer
When sending a job to the printer, you can specify in the driver that you want the printer to hold the job
in memory. When you are ready to print the job, you must go to the printer and use the operator panel
menus to identify which held job you want to print.
Note: Print and Hold functions require a minimum of 16MB available printer memory. We
recommend a minimum of 32MB available printer memory and a hard disk.
To learn more about this function, click a topic:
• Printing and deleting held
jobs
• Recognizing when format
errors occur
• Verifying print jobs
• Reserving print jobs

Printing and deleting held jobs

Once held jobs are stored in printer memory, you can use the printer operator panel to specify what
you want to do with one or more of the jobs. You can select either Confidential Job or Held Jobs
(Repeat Print, Reserve Print, and Verify Print jobs) from the
you must enter the personal identification number (PIN) you specified in the driver when you sent the
job. See Printing confidential jobs
From either the Confidential Job or the Held Jobs menu items, you have five choices:
•
Print All Jobs
•
Print A Job
•
Delete All Jobs
•
Delete A Job
•
Print Copies
• Accessing held jobs from
the operator panel
• Repeating print jobs at a
later time
• Printing confidential jobs
for more information.
13
Job Menu. If you select Confidential Job,