USB Menu
Use this menu to change settings for jobs sent to the printer through the Universal Serial Bus (USB)
interface port.
•
NPA M
ODE
•
USB B
UFFER
NPA Mode
When NPA Mode is enabled, your computer can send print jobs to the printer and query printer status
information simultaneously.
Menu item
NPA Mode
*Factory default
USB Buffer
You can configure the size of the USB input buffer to meet your system's requirements. The maximum
size you can modify depends on the amount of memory in your printer. Auto, the default setting,
calculates a buffer size proportional to the total amount of available printer memory.
Menu item
USB Buffer
*Factory default
Value
=On
=Off
=Auto*
Value
=Disabled
=Auto*
=3K to maximum size allowed
Note:
Changing the parallel buffer setting automatically resets the
printer.
101