Usb Buffer - Lexmark W820 User Manual

PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the USB port requires it, regardless of the default printer language.
Values:
See also:

USB Buffer

Purpose:
To configure the size of the USB input buffer.
Values:
See also:
Downloaded From ManualsPrinter.com Manuals
On* Printer examines data on the USB interface and selects PostScript emulation if the data
indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the
job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup
Menu if PCL SmartSwitch is Off.
PCL SmartSwitch; Printer Language
Disabled Disables the USB port.
Auto* Printer automatically calculates the USB Buffer size (recommended setting).
3K to maximum User specifies the USB Buffer size. The maximum size depends on the
size allowed amount of memory in your printer, the size of the other link buffers, and
whether Resource Save is set to On or Off. To maximize the range for the USB
Buffer size, disable or reduce the size of the parallel, serial, network, infrared,
and LocalTalk buffers.
Note: Changing the USB Buffer menu item automatically resets the printer.
Resource Save
267