Adjusting The Finisher Wheels - Lexmark C920 User Manual

4
Roll the finisher toward the printer until the finisher locks to the docking pins.
You hear a click when the finisher locks into position.

Adjusting the finisher wheels

Adjust the wheels on the end of the finisher so the stand will remain aligned when moved.
To adjust and lock the wheels:
1
Rotate the left and right upper adjustment knobs on the rear wheels until the wheels touch the floor.
To lower the wheels, rotate the adjustment knobs clockwise.
2
Turn the wheels until the locking knobs are aligned with the finisher base.
3
Rotate the locking knobs counterclockwise until they contact the finisher base.
Installing and removing options
Adjusting the finisher wheels
43