Cannot Print From Digital Camera Using Pictbridge - Lexmark X3550 User Manual

Check cartridges
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
3
Reinsert the cartridges.
Check printer default and pause settings
1
Click:
•
In Windows XP (default Start menu): Start
•
In Windows XP (Classic Start menu): Start
•
In Windows Vista (default Start menu):
•
In Windows Vista (Classic Start menu):
2
Double-click the printer queue device.
3
Click Printer.
•
Make sure no check mark appears next to Pause Printing.
•
If a check mark does not appear next to Set As Default Printer, you must select the print queue device for
each file you want to print.
Reconnect power supply
1
Press to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Gently remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press to turn the printer on.
Removing and reinstalling the software
Uninstall the printer software, and then reinstall it. For more information, see "Removing and reinstalling the software"
on page 100.

Cannot print from digital camera using PictBridge

These are possible solutions. Try one or more of the following:
Enable PictBridge printing from camera
Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital
camera documentation.
2
Printers and Faxes.
Settings Printers and Faxes.
Control Printers (under Hardware and Sound).
Printers.
80