Phone Line Error - Lexmark 7600 Series Fax Manual

5
To change the length of time between redials:
a
Press the up or down arrow button until Redial Time is highlighted, and then press OK.
b
Press the up or down arrow button until the setting you want is highlighted, and then press OK.
S
CHEDULE TO RESEND FAX AT A LATER TIME
See the instructions on sending a broadcast fax at a scheduled time.

Phone Line Error

These are possible causes and solutions. Try one or more of the following:
R
EVIEW DIGITAL PHONE SERVICE CHECKLIST
The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone
services can be used.
•
If you are using an ISDN telephone service, connect the printer to an analog telephone port (an R-interface
port) on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN
provider.
•
If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact
your DSL provider.
•
If you are using a PBX telephone service, make sure you are connecting to an analog connection on the PBX.
If none exists, consider installing an analog telephone line for the fax machine. For more information on faxing
when using a PBX telephone service, see the instructions for setting up to fax while behind a PBX.
C
HECK PHONE LINE
If the telephone line is being used by another device, wait until the other device is finished before sending the fax.
C
HECK CABLE CONNECTIONS
Make sure cable connections for the following hardware are secure, if applicable:
•
Power supply
•
Telephone
•
Handset
•
Answering machine
Troubleshooting
53