Scanning Color Or Black-And-White Original Documents; Scanning Photos For Editing; Scanning To A Computer Over A Network - Lexmark 4600 Series User Manual

Scanning color or black-and-white original documents

1
Open the top cover, and then load an original document facedown on the scanner glass.
2
Close the top cover to avoid dark edges on the scanned image.
3
From the printer control panel, press
4
Press the arrow buttons to choose where to send the scanned image. You can send the scanned image to a
computer, flash drive, memory card, or to a computer over a network.
5
When the destination that you want appears, press
6
To scan black-and-white documents, press
Note: The default setting when you are using the Scan mode is Color. You do not need to press
scanning a color document.
7
Press .

Scanning photos for editing

1
Open the top cover, and then load an original document facedown on the scanner glass.
2
Close the top cover to avoid dark edges on the scanned image.
3
From the printer control panel, press
4
Press the arrow buttons until Computer or Network appears, and then press
Note: If you choose Network, you will be asked to select a network computer. If prompted, press the arrow
buttons until the network computer that you want appears, and then press
5
Wait for the printer to finish downloading the applications list.
Note: This list is downloaded from the applications available on the computer. Make sure a photo-editing
application is installed on the computer.
6
From the list of applications, press the arrow buttons until the application that you want appears.
7
Press .
The scanned image is sent to the photo-editing application that you selected.

Scanning to a computer over a network

1
Make sure that:
•
The printer is connected to a network through a print server or through a wireless network connection.
•
The printer, the print server (if used), and the computer receiving the scanned image are all turned on.
•
The printer is configured to scan over a network.
2
Load an original document facedown on the scanner glass.
3
From the printer control panel, press
4
Press the arrow buttons until Network appears, and then press
5
If prompted, press the arrow buttons to select the computer name of the network computer where you want to
send the scanned image, and then press
.
.
.
.
.
.
90
.
.
.
if you are